User guide

3-16
Chapter 3: BIOS setup
Chapter 3
SVM [Enabled]
Enable AMD virtualization in CPU. This secure virtual mode will let you run multiple OS
(guest) on the same physical hardware by decoupling OS and physical hardware with the
hypervisor layer. Conguration options: [Enabled] [Disabled]
Core C6 State [Enabled]
Enables or disables Core C6 state function. Conguration options: [Disabled] [Enabled]
HPC Mode [Enabled]
Allows you to disable or enable High Performance Computing Mode. Conguration options:
[Enabled] [Disabled]
Apm Master Mode [Auto]
Enables or disables Application Power Management. Conguration options: [Auto] [Disabled]
[Enabled]
3.5.2 North Bridge
IOMMU [Disabled]
Allows you to disable or enable the IOMMU. IOMMU is supported on Linux based systems to
convert 32bit I/O to 64bit MMIO. Conguration options: [Disabled] [Enabled]
Memory Conguration
Allows you to set the related memory congurations.
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving. Conguration options: [Auto]
[Disabled]
Channel Interleaving [Auto]
Allows you to enable the channel memory interleaving. Conguration options:
[Disabled] [Auto]
ECC Mode [Enabled]
Allows you to enable or disable the ECC mode. Conguration options: [Disabled]
[Enabled]
Power Down Enable [Disabled]
Allows you to enable or disable the DDR power down mode. Conguration options:
[Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable memory remapping around memory hole.
Conguration options: [Disabled] [Enabled]
DCT Unganged Mode [Enabled]
Allows you to select unganged mode or ganged mode. Conguration options:
[Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the primary boot graphic controller. Conguration options: [PEG/PCI]
[PCI/PEG]