User guide

3-18
Chapter 3: BIOS setup
Chapter 3
Board SATA RAID ROM [Legacy ROM]
This item appears only when you set SATA Port1 - Port4 to [RAID] and allows you to
select Board SATA RAID ROM. Conguration options: [Disabled] [Legacy ROM] [UEFI
DRIVER]
S.M.A.R.T. Status Check [Enabled]
[Enabled] Enables the S.M.A.R.T feature.
[Disabled] Disables the S.M.A.R.T feature.
SATA ESP on PORT1 ~ 6 [Disabled]
Conguration options: [Enabled] [Disabled]
3.5.5 USB Conguration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy operating systems (OS).
[Disabled] The USB devices can be used only for the BIOS setup program.
[Auto] Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Legacy USB3.0 Support [Enabled]
This item appears only when you set the previous item to [Enabled].
[Enabled] Enables the support for USB 3.0 devices on legacy operating systems
(OS).
[Disabled] Disables the function.
EHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without an EHCI hand-off
feature.
[Disabled] Disables the function.
SB USB Conguration
Options for SB USB Conguration.
USB PORT 1 ~ 6 & 9-14 [Enabled]
Conguration options: [Enabled] [Disabled]
3.5.6 CPU Core On/Off Function
CPU Core Activation [Auto]
This item lets user turn off cores except core 1, user can turn off 2nd, 3rd, 4th, 5th, etc core
manually. Conguration options: [Auto] [Manual]