User’s Manual

ASUS Mini PC PB60 Series

Installing top memory module

IMPORTANT!

• Refertohttp://www.asus.com for the list of compatible DIMMs.

You can only install DDR4 SO-DIMMs to the Mini PC’s DIMM slot.

• OnlyASUS-authorizedtechniciansshouldremoveandinstall

motherboard and mechanical parts inside your Mini PC. Please

refer to the terms and conditions in the warranty card.

• VisitanauthorizedASUSservicecenterorretailerfor

information on module upgrades for your Mini PC.

1. (optional) Remove the storage bay if a storage bay is installed. Follow

step 2 under the Installing 2.5” HDD or SSD section to remove the

storage bay.

2. Remove the two (2) screws securing the fan (A), then disconnect the

fan connector (B) and lift the fan upwards so that it is perpendicular to

the heatsink (C), but do not remove the fan completely.