Computer Hardware User Manual
ASUS P8H61-M2/TPM/SI R2.01-26
8. USB 2.0 connectors (10-1 pin USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specication that supports up to
480Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
9. Speaker connector (4- pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
PIN 1
USB+5V
USB_P10-
USB_P10+
GND
NC
USB+5V
USB_P9-
USB_P9+
GND
USB910
PIN 1
USB+5V
USB_P8-
USB_P8+
GND
NC
USB+5V
USB_P7-
USB_P7+
GND
USB78
P8H61-M2/TPM/SI R2.0
P8H61-M2/TPM/SI R2.0 USB2.0 connectors
P8H61-M2/TPM/SI R2.0
P8H61-M2/TPM/SI R2.0 speaker out connector
+5V
GND
GND
Speaker Out
SPEAKER
PIN 1
E7361_P8H61-M2-TPM-SI R2.0_Manua26 26 5/16/12 1:44:33 PM