TV Tuner Card EHD3-100/NAQ/FM/AV/MCE/RC Quick Start Guide QE4655 / April 2009
EHD3-100 TV Tuner Card Quick Start Guide 1. System requirements Before using the EHD3-100 TV Tuner Card, check if your system meets the following requirements: • Microsoft® Windows® XP Home Edition, Professional Edition; Microsoft® Windows® Vista Home Basic, Home Premium, Business, Ultimate • Intel® Pentium® 4 2.6GHz CPU or higher for SDTV; Intel® Core™2 Duo 2.
EHD3-100 TV Tuner Card Quick Start Guide 3. Installing the EHD3-100 TV Tuner Card IMPORTANT: • Install the EHD3-100 TV Tuner Card into your computer before installing the driver and utilities from the bundled support CD. • If you have previously installed another TV tuner card in your computer, uninstall the software and the card before installing the EHD3-100. To install the EHD3-100 TV Tuner Card into your computer: 1. Turn off your computer and unplug it from the power source. 2.
EHD3-100 TV Tuner Card Quick Start Guide 4.2 Installing the driver and utilities manually To install the driver and utilities manually: 1. Turn on your computer. 2. Windows® automatically detects the TV tuner card and displays the Found New Hardware Wizard window. Click Cancel. 3. Place the support CD into the optical drive. An autorun screen appears if Autorun is enabled on your computer. 4. Select Windows XP/Vista, then click Install Driver.
EHD3-100 TV Tuner Card Quick Start Guide 5. Frequently Asked Questions (FAQs) What can I do if I get poor digital signal reception? • Digital TV reception capability varies depending on your area. Use a roof antenna in low signal areas. • Check if ATSC TV is supported in your area at www.antennaweb.org. • Check if your antenna is damaged or if it is connected properly. • Reorient or relocate the bundled patch antenna. • Attach the bundled patched antenna to metal.