Computer Hardware User Manual

2-20 Chapter 2: BIOS Setup
Slot 1, Slot 2, Slot 3 IRQ [Auto]
These fields assign the IRQ for each PCI slot. The default setting for each field is
[Auto], which utilizes auto-routing to determine IRQ assignments.
Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]
PCI/VGA Palette Snoop [Disabled]
Some non-standard VGA cards, like graphics accelerators or MPEG video cards,
may not show colors properly. Setting this field to [Enabled] corrects this problem.
If you are using standard VGA cards, leave this field to the default setting
[Disabled]. Configuration options: [Disabled] [Enabled]
PCI Latency Timer [32]
Leave this field to the default setting [32] for best performance and stability.
USB 1.1 Controller [3 Controllers]
This field allows you to select the number of USB 1.1 controllers that you wish to
activate. Configuration options: [Disabled] [3 Controllers]
2.4.3 PCI Configuration
Onboard AC97 Audio Controller [Auto]
[Auto] allows the BIOS to detect whether you are using any audio device. If an
audio device is detected, the onboard audio controller is enabled; if no audio
device is detected, the controller is disabled. If there are conflicts with the onboard
audio controller, set the appropriate field to [Disabled].
Configuration options: [Disabled] [Auto]
Onboard MIDI I/O [Disabled]
This field allows you to select the I/O address for the MIDI port.
Configuration options: [Disabled] [330H-331H] [300H-301H]
Onboard Game Port [200H-207H]
This field allows you to select the I/O address for the game port.
Configuration options: [Disabled] [200H-207H] [208H-20FH]