Manual

17
3. HARDWARE SETUP
ASUS P4T-EM User’s Manual
Motherboard Settings
3. H/W SETUP
®
P4T-EM
P4T-EM Onboard LED
ON
OFF
Standby
Power
Powered
Off
®
P4T-EM
P4T-EM DIP Switches
SW1
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection.
ON OFF
ON
12345
2) Onboard Power Signal (LED)
The board LED illuminates if power is connected and operating okay and when
the system is in soft-off or suspend mode. Adding or removing devices is not
advisable when the LED is lit, since the user risks electrical shock and/or
disabling system configuration.
1) Motherboard Frequency Settings (SW1)
The motherboard frequency is adjusted through the DIP switches. The white
block represents the switch’s position. The illustration below shows all the
switches in the OFF position.