Manual

ASUS P4T-EM User’s Manual68

4. BIOS SETUP

Power Up Control

4.5.1 Power Up Control

AC PWR Loss Restart [Disabled]

This allows you to set whether you want your system to reboot after the

power has been interrupted. [Disabled] leaves your system off and [En-

abled] reboots your system. [Previous State] sets your system back to the

state it is before the power interruption. Configuration options: [Disabled]

[Enabled] [Previous State]

PWR Up On external Modem Act [Disabled]

This allows either settings of [Enabled] or [Disabled] for powering up the

computer when the external modem receives a call while the computer is

in Soft-off mode. NOTE: The computer cannot receive or transmit data

until the computer and applications are fully running. Thus connection can-

not be made on the first try. Turning an external modem off and then back

on while the computer is off causes an initialization string that will also

cause the system to power on. Configuration options: [Disabled] [Enabled]

Wake On LAN or PCI Modem card [Disabled]

Wake-On-LAN or a PCI modem card prermits PC bootup from another

computer via a network by sending a wake-up frame or signal. Configura-

tion options: [Disabled] [Enabled]

Wake On PS2 KB / PS2 Mouse [Disabled]

Wake On PS2 KB / PS2 Mouse permits PC bootup from the keyboard or

mouse. Configuration options: [Disabled] [Enabled]

IMPORTANT: This feature requires an optional network interface with Wake-On-

LAN and an ATX power supply with at least 720mA +5V standby power.