Instruction Manual

ManualsBrandsAsus ManualsMotherboardP5GD2 Premium

100

ASUS P5GD2 PremiumASUS P5GD2 Premium

ASUS P5GD2 Premium

4-294-29

4-29

4.4.84.4.8

4.4.8

Speech ConfigurationSpeech Configuration

Speech Configuration

Speech POST Reporter [Enabled]Speech POST Reporter [Enabled]

Speech POST Reporter [Enabled]

Allows you to enable or disable the ASUS Speech POST Reporter™ feature.

Configuration options: [Disabled] [Enabled]

Speech Option

Speech POST Reporter [Enabled]

Report IDE Error [Disabled]

Report System Checking [Disabled]

Report System Booting [Disabled]

Allocate IRQ to PCI VGA [Yes]Allocate IRQ to PCI VGA [Yes]

Allocate IRQ to PCI VGA [Yes]

When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card

requests for an IRQ. When set to [No], BIOS does not assign an IRQ to the

PCI VGA card even if requested. Configuration options: [No] [Yes]

Palette Snooping [Disabled]Palette Snooping [Disabled]

Palette Snooping [Disabled]

When set to [Enabled], the pallete snooping feature informs the PCI

devices that an ISA graphics device is installed in the system so that the

latter can function correctly. Configuration options: [Disabled] [Enabled]

PCI IDE BusMaster [Enabled]PCI IDE BusMaster [Enabled]

PCI IDE BusMaster [Enabled]

Allows BIOS to use PCI bus mastering when reading/writing to IDE devices.

Configuration options: [Disabled] [Enabled]

OffBoard PCI/ISA IDE Card [Auto]OffBoard PCI/ISA IDE Card [Auto]

OffBoard PCI/ISA IDE Card [Auto]

Allows you to set the PCI slot number holding a PCI IDE card that requires

you to set the slot number. Configuration options: [Auto] [PCI Slot1]

[PCI Slot2] [PCI Slot3] [PCI Slot4] [PCI Slot5] [PCI Slot6]

IRQ-xx assigned to [PCI Device]IRQ-xx assigned to [PCI Device]

IRQ-xx assigned to [PCI Device]

When set to [PCI Device], the specific IRQ is free for use of PCI/PnP

devices. When set to [Reserved], the IRQ is reserved for legacy ISA

devices. Configuration options: [PCI Device] [Reserved]

The following items appear only when Speech POST Reporter is set to

Enabled.

Report IDE Error [Disabled]Report IDE Error [Disabled]

Report IDE Error [Disabled]

Enables or disables the report feature in the event of an IDE error.

Configuration options: [Disabled] [Enabled]