User Guide

NVIDIA Corporation 135
C
HAPTER 4
Initializing, Rebuilding, and Synchronizing RAID Arrays
6 Click Finish.
The array rebuilding starts after a few seconds, and a small pop-up message appears
towards the bottom right corner of the screen as shown in Figure 4.11.
Figure 4.11 Rebuild Bubble Message
When the rebuilding process is finished you will see the pop up box shown inFigure
4.12.
Figure 4.12 Rebuild Finished Bubble Message
During the rebuilding process, the NVIDIA MediaShield RAID Management utility
screen shows the status under the System Tasks and Details sections.
Figure 4.13 Array Rebuilding Status Detail