User's Manual

1-261-26
1-261-26
1-26
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
4.4.
4.4.
4.
CPU and Chassis fan connectorsCPU and Chassis fan connectors
CPU and Chassis fan connectorsCPU and Chassis fan connectors
CPU and Chassis fan connectors
(4-pin CPU_FAN1, 3-pin CHA_FAN1)(4-pin CPU_FAN1, 3-pin CHA_FAN1)
(4-pin CPU_FAN1, 3-pin CHA_FAN1)(4-pin CPU_FAN1, 3-pin CHA_FAN1)
(4-pin CPU_FAN1, 3-pin CHA_FAN1)
The fan connectors support cooling fans of 350mA~740mA (8.88W
max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan
cables to the fan connectors on the motherboard, making sure that the
black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on the
fan connectors.
3.3.
3.3.
3.
Serial ATA connectors (7-pin SATA1, SATA2)Serial ATA connectors (7-pin SATA1, SATA2)
Serial ATA connectors (7-pin SATA1, SATA2)Serial ATA connectors (7-pin SATA1, SATA2)
Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk drives.
Install the Windows
®
2000 Service Pack 4 or the Windows
®
XP Service
Pack1 or later before using Serial ATA.
P5P800-MX
®
P5P800-MX SATA connectors
SATA2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
SATA1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
P5P800-MX
®
P5P800-MX Fan connectors
CPU_FAN1
CHA_FAN1
GND Rotation +12V
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM