User's Manual

ASUS P5P800-MXASUS P5P800-MX
ASUS P5P800-MXASUS P5P800-MX
ASUS P5P800-MX
1-291-29
1-291-29
1-29
9.9.
9.9.
9.
Internal audio connectors (4-pin CD1, AUX1)Internal audio connectors (4-pin CD1, AUX1)
Internal audio connectors (4-pin CD1, AUX1)Internal audio connectors (4-pin CD1, AUX1)
Internal audio connectors (4-pin CD1, AUX1)
These connectors allow you to receive stereo audio input from sound
sources such as a CD-ROM, TV tuner, MPEG card or modem.
P5P800-MX
®
P5P800-MX Internal audio connectors
CD1(Black)
AUX1(White)
Right Audio Channel
Left Audio Channel
Ground
Ground
Right Audio Channel
Left Audio Channel
Ground
Ground
P5P800-MX
®
P5P800-MX System panel connector
F_PANEL1
PWRGround
GNDReset
IDE_LED+
IDE_LED-
RESETIDE LED
PWRSW
10.10.
10.10.
10.
System Front panel connectors (10-pin F_PANEL1)System Front panel connectors (10-pin F_PANEL1)
System Front panel connectors (10-pin F_PANEL1)System Front panel connectors (10-pin F_PANEL1)
System Front panel connectors (10-pin F_PANEL1)
This connector supports several chassis-mounted functions.
Power/Soft-off button (2-pin PWRSW)Power/Soft-off button (2-pin PWRSW)
Power/Soft-off button (2-pin PWRSW)Power/Soft-off button (2-pin PWRSW)
Power/Soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power
button turns the system ON or puts the system in SLEEP or SOFT-OFF
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
Hard disk drive activity (2-pin IDE_LED)Hard disk drive activity (2-pin IDE_LED)
Hard disk drive activity (2-pin IDE_LED)Hard disk drive activity (2-pin IDE_LED)
Hard disk drive activity (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
Reset button (2-pin RESET)Reset button (2-pin RESET)
Reset button (2-pin RESET)Reset button (2-pin RESET)
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.