User's Manual

2-262-26

2-26

Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setup

USB Mass Storage Device ConfigurationUSB Mass Storage Device Configuration

USB Mass Storage Device Configuration

USB Mass Storage Reset Delay [20 Sec]

Allows you to select the number of seconds POST waits for the USB

mass storage device after the start unit command. The message “No

USB mass storage device detected” appears if none is installed in the

system. Configuration options: [10 Sec ] [20 Sec] [30 Sec] [40 Sec]

Emulation Type [N/A]

When set to Auto, USB devices less than 530MB will be emulated as

floppy drive, and the remaining drives as hard drives. Forced FDD

option can be used to force an HDD formatted drive to boot as FDD

(for example, ZIP drive).

The Device and Emulation Type items appear only when there are

installed USB devices.

USB Mass Storage Device Configuration

USB Mass Storage Reset Delay [20 Sec]

No USB Mass Storage device detected