Owner manual
63
Introduction
WLAN (IEEE 802.11b/g), refers to certain types of wireless local area network (WLAN) that
use specications in the 802.11 family.
Activating WLAN in your device
To activate WLAN in your device:
1. Tap Start > Settings > Connections tab then tap the Wi-Fi Manager icon.
2. From the Wi-Fi Manager screen, tap Menu then Turn Wi-Fi On.
You can also turn Wi-Fi on or off from the Today screen or using the Wireless Manager:
Refer to page 56 to turn WLAN on or off using the Wireless Manager.
Using WLAN (IEEE 802.11b/g)
NOTE:
• When WLAN is used simultaneously with the GPRS, the latter will get signal priority. We recommend not to use
WLAN and GPRS at the same time.
• We recommend not to use WLAN and the Bluetooth function at the same time. It may cause disturbance in data
transmission since both use the same wireless channel.
• The WLAN and USB connections cannot be used at the same time.
• When the battery power is less than 20% the device prompts a warning message whether to continue using WiFi or
not. Tap “Yes” to continue using or “No” to disconnect. We recommend that you plug the power adapter
immediately to avoid losing data.