User’s Manual

PE200U Series

Layout contents Page

1. M.2 Wi-Fi slot 24

2. Nano SIM Card slot 24

3. Mini PCIe/mSATA slot 22

4. DIMM slot 16

5. Low Pin Count connector 26

6. Battery connector 26

7. LVDS connector (on selected models) 25

8. Back Light Inverter Power connector (on selected models) 33

9. EDP Signal connector (on selected models) 27

10. LVDS Panel Power Selection jumper (on selected models) 18

11. Back Light Power Selection jumper (on selected models) 18

12. Back Light Power Enable jumper (on selected models) 19

13. GPIO connector 28

14. Mini PCIe/mSATA conguration jumper 20

15. Clear RTC RAM jumper 17

16. System Management Bus connector 28

17. I2C connector 29

18. Serial Port connector 30

19. Micro SD card slot 23

20. M.2 slot 23

21. USB 2.0 connector 31

22. SATA 6Gb/s & SATA Power connector 21

23. DC-in 4-Pin Power connector 33

24. Chassis Intrusion connector 32

25. AT/ATX Mode Conguration jumper 20

26. HW WDT Enable jumper 19

27. Power button connector 25

28. SPI TPM connector 29

29. System Panel connector 35

30. Fan connector (on selected models) 34

31. Line Out / Mic connector 36