User’s Manual

48 PE200U Series
NOTE: The illustrations in this section are for reference only. The slots
may vary depending on model.
3.1 Removing the bottom cover
1. TurnoyourEdgeComputer
then disconnect all cables and
peripherals.
2. Place the Edge Computer on a
at stable surface, with its top
side facing down.
3. Remove the four (4) rubber
feet screws from the bottom
cover.
4. Remove the four (4) screws
securing the bottom cover.
5. After removing the screws,
remove the bottom cover and
place it aside.
IMPORTANT!
• Ensurethatyourhandsaredrybeforeproceedingwiththerest
of the installation process. Before installing any of the features in
this guide, use a grounded wrist strap or touch a safely grounded
object or metal object to avoid damaging them due to static
electricity.
• TurnothepowerofyourEdgeComputer,andallowittocool
for at least 10 minutes before performing any installation/
uninstallation process.