User’s Manual

PE200U Series

3.11 Installing the USB 2.0 module

(on selected models)

1. Align the bundled USB 2.0 module with the USB 2.0 port holes and

screw holes on the rear panel.

2. Secure the USB 2.0 module to the rear panel using two (2) bundled

hex bolts and hex nuts.

3. Connect the USB 2.0 module connector to the USB 2.0 connector on

the motherboard.

NOTE: Please refer to the Motherboard layout section for the location of

the USB 2.0 connectors.

4. To install another USB 2.0 module, please repeat steps 1-3.