User`s manual

98
System Management RX3042H User's Manual
Sometimes, you may find that you have no way to access the
RX3042H, e.g. you forget your password or the IP address of
RX3042H. The only way out in this scenario is to reset the system
configuration to the factory default by pressing the reset button for
at least 5 seconds. The system configuration will be reverted back
to the factory default settings after RX3042H is rebooted.
10.7.2 Backup System Configuration
Follow the steps below to backup system configuration:
1. Open the Configuration Backup page by clicking the
Management ->Configuration ->Backup
menu.
2. Click on
Apply
button to backup the system configuration.
Figure 10.11 Backup System Configuration Page
3. Click on
Save
button to backup the system configuration.