User`s manual

103
RX3042H User's Manual System Management
5. A count down timer will display, as shown in Figure 10.20, after
the firmware upgrade is completed. Youʼll be reconnected
back to RX3042H when the counter returns to zero. You may
need to manually connect back to the RX3042H if you are not
connected back to RX3042H automatically.
Figure 10.20 System Reboot Count Down Timer for Firmware
Upgrade
6. When you are reconnected to the RX3042H, click
Status
menu
to check if the new firmware is properly upgraded. Note that you
probably need to clear the cache of your web browser to see
the new System Information page. Following is the procedure to
clear the browser cache for Microsoft Internet Explorer:
a) Click on
Tools
menu
b) Click on
Internet Options...
menu
c) Click on
Delete Files...
button to clear the browser cache.
10.9 Restart System
1. Open the Restart System page, as shown in Figure 10.21, by
clicking the
Management ->Restart System
menu.
2. Click on the
Apply
button to restart the system.