User`s manual

RX3042H User's Manual Quick Start Guide
15
and then click <
OK
> button.
You may be prompted to install files from your Windows 2000
installation CD or other media. Follow the instructions to install
the files.
7. If prompted, click <
OK
> button to restart your computer with the
new settings.
Next, configure the PCs to accept IP addresses assigned by
the RX3042H:
8. In the Control Panel, double-click the
Network and Dial-up
Connections
icon.
9. In Network and Dial-up Connections window, right-click the
Local Area Connection
icon, and then select
Properties
.
10.In the Local Area Connection Properties dialog box, select
Internet Protocol (TCP/IP)
, and then click <
Properties
>
button.
11.In the Internet Protocol (TCP/IP) Properties dialog box, click the
radio button labeled
Obtain an IP address automatically
. Also
click the radio button labeled
Obtain DNS server address
automatically
.
12.Click <
OK
> button twice to confirm and save your changes, and
then close the Control Panel.
3.2.4 Windows® 95, 98, and ME PCs
1. In the Windows task bar, click the <
Start
> button, point to
Settings
, and then click
Control Panel
.
2. Double-click the Network icon.
In the Network dialog box, look for an entry started with “
TCP/
IP ->
” and the name of your network adapter, and then click
<
Properties
> button. You may have to scroll down the list to
find this entry. If the list includes such an entry, then the TCP/
IP protocol has already been enabled. Skip to step 8.
3. If Internet Protocol (TCP/IP) does not display as an installed
component, click <
Add
> button.
4. In the Select Network Component Type dialog box, select