User`s manual

Quick Start Guide RX3042H User's Manual
16
Protocol, and then click <
Add
> button.
5. Select Microsoft in the Manufacturers list box, and then click
TCP/IP in the Network Protocols list, box and then click <
OK
>
button.
You may be prompted to install files from your Windows 95, 98
or Me installation CD or other media. Follow the instructions to
install the files.
6. If prompted, click <OK> button to restart your computer with the
new settings.
Next, configure the PCs to accept IP information assigned by
the RX3042H:
7. In the Control Panel, double-click the Network icon.
8. In the Network dialog box, select an entry started with “
TCP/
IP ->
” and the name of your network adapter, and then click
<
Properties
> button.
9. In the TCP/IP Properties dialog box, click the radio button
labeled
Obtain an IP address automatically
.
10.In the TCP/IP Properties dialog box, click the “
Default
Gateway
” tab. Enter
192.168.1.1
(the default LAN port IP
address of the RX3042H) in the “
New gateway
” address field
and click <
Add
> button to add the default gateway entry.
11. Click <
OK
> button twice to confirm and save your changes,
and then close the Control Panel.
12. If prompted to restart your computer, click <
OK
> button to do
so with the new settings.
3.2.5 Windows® NT 4.0 workstations:
First, check for the IP protocol and, if necessary, install it:
1. In the Windows NT task bar, click the <
Start
> button, point to
Settings
, and then click
Control Panel
.
2. In the Control Panel window, double click the
Network
icon.
3. In the Network dialog box, click the
Protocols
tab.
The Protocols tab displays a list of currently installed network