User`s manual

RX3042H User's Manual DHCP Server Configuration
43
Setting Description
Connectivity
Check (Cont.)
will need to disable this feature. Otherwise, RX3042H will
make incorrect judgment regarding the WAN link status
and thus affect the behavior of the load balancing or line
back up.
Connectivity
Check Interval
The interval that RX3042H will check for the WAN link
status. The allowable value is 1 to 60 seconds.
Connectivity
Check IP
Address
(WAN1)
Enter the IP address of the specific network device that
the traffic will pass through. This field is optional. Normally,
you donʼt need to provide any IP address here, unless you
know the traffic must pass a specific network device.
Connectivity
Check IP
Address
(WAN2)
Enter the IP address of the specific network device that
the traffic will pass through. This field is optional. Normally,
you donʼt need to provide any IP address here, unless you
know the traffic must pass a specific network device.
5.3.2 Setting Up WAN Load Balancing and Line
Back Up
Figure 5.8. Load Balancing Configuration