User`s manual

DHCP Server Configuration RX3042H User's Manual
48
6.1.4 Viewing Current DHCP Address Assignments
When the RX3042H functions as a DHCP server for your LAN, it
keeps a record of any addresses it has leased to your computers.
To view a table of all current IP address assignments, just open
the DHCP Server Configuration page and click on the link “Current
DHCP Lease Table” located at the bottom of the configuration page.
A page displays similar to that shown in Figure 6.2.
The DHCP lease table lists any IP addresses leased and the
corresponding MAC addresses.
Figure 6.2. DHCP Lease Table
6.1.5 Fixed DHCP Lease
Fixed DHCP lease is used in situation when a fixed DHCP address
is desired for a host that gets IP from the DHCP server. First, you
should configure your PCs to accept DHCP information assigned
by a DHCP server:
6.1.5.1 Access Fixed DHCP Configuration Page – (Advanced
->DHCP Server)
Open the Fixed DHCP Lease configuration page, as shown in
Figure 6.3, by clicking Advanced ->DHCP Server menu.
Note that when you open the Fixed DHCP Lease configuration
page, a list of existing lease is also displayed at the bottom half of
the configuration page such as those shown in Figure 6.3.