User`s manual

60
Configuring DDNS RX3042H User's Manual
8.1 DDNS Configuration Parameters
Table 8.1 describes the configuration parameters available for
DDNS service.
Table 8.1. DDNS Configuration Parameters
Field Description
Interface
Select the interface that the DDNS service is to be used.
Status
Shows the state of DDNS.
Enable
DDNS
Check this box to enable DDNS service; otherwise, keep the
box unchecked.
Domain
Name
Enter the registered domain name into this field. For example,
If the host name of your RX3042H is “host1” and the domain
name is “yourdomain.com”, The fully qualify domain name
(FQDN) is “host1.yourdomain.com”.
Username
Enter the username provided by your DDNS service provider
in this field.
Password
Enter the password provided by your DDNS service provider
in this field.
8.2 Configuring HTTP DDNS Client
Figure 8.2. HTTP DDNS Configuration Page