User`s manual

RX3042H User's Manual Configuring Firewall
85
5. Select the service, HTTP_8080, from the Redirect Service drop-
down list.
6. Click
Add
to save the virtual server settings.
9.7.3 Virtual Server Example 2 – FTP Server
Figure 9.10 illustrates the network topology for the FTP server
deployment. This FTP server provides FTP service using standard
FTP port.
Following describes the procedure to setup the FTP server as
illustrated in Figure 9.10.
1. Open the Virtual Server configuration page, as shown in Figure
9.9, by clicking the
Firewall/NAT ->Virtual Server
menu.
2. Enter the needed information as shown in Figure 9.13.
3. Click
Add
to save the virtual server settings.
Figure 9.13. Virtual Server Example 2 – FTP Server
9.8 Configure Special Application
Some applications use multiple TCP/UDP ports to transmit data.
Due to NAT, these applications cannot work with the router. Special
Application setting allows some of these applications to work
properly.