Owner's manual

ASUS VPN ADSL Router 91
Chapter 10
Chapter 10
10.2 Establish VPN Connection Using Automatic Keying
This section describes the steps to establish the VPN tunnel using the Configuration
Manager. Internet Key Exchange (IKE) is the automatic keying protocol used to
exchange the key that is used to encrypt/authenticate the data packets according
to the user-configured rule. The parameters that should be configured are:
• the network addresses of internal and remote networks.
• the remote gateway address and the local gateway address.
• preshared secret for remote gateway authentication.
• appropriate priority for the connection.
Use them to configure basic Access Rule that will be used to establish a tunnel
from local secure group to remote secure group with basic parameters.
Options in this screen allow you to:
• Add an Access List, and set basic parameters for it
• Modify an Access List
• Delete an existing Access List
10.2.1 VPN Tunnel Configuration Parameters for Automatic Keying
Table 10.4 describes the VPN tunnel configuration parameters using preshared
key as key management mode.
Table 10.4 VPN tunnel configuration parameters using preshared key for key management