User`s guide

Chapter 7. The Configuration Pages in more detail Solwise Asus SL6000 ADSL Ethernet Router User’s Guide
68
or ATM.
2.
IP Address:
Enter the selected interface's IP Address, which can also be used for
Administrative access to the Broadband Gateway.
3. Subnet Mask:
Enter the Subnet Mask that will be used for all the PCs connected to the
selected LAN interface
Notes
•
If you attempt the change the mode of the Ethernet interface from Router to Bridge, the
Broadband Gateway will reboot for the change to take effect
•
The Bridge IP Settings are the same for all Interfaces that are in bridged mode or that have
bridge services running over them
7.1.2 DHCP
Usage Guidelines
You can use page "System Management -> Global Setting" to enable/disable the Broadband
Gateway's DHCP server. To enable the DHCP Server, select the Enable option for DHCP
Server and click the Apply button. Prior to this, valid IP Address pool settings must be entered,
else the DHCP server will not get enabled. Enter the valid values for
Start IP address
and
End
IP Address
before enabling the DHCP server.