User Guide

ManualsBrandsASUS ManualsDigital SignageST467

The OSD (On-Screen Display) menu 43

Setting menu

Language English

Schedule

Power Save High

Control Setting

Network Settings

Set Monitor ID 1

HDMI Control Off

Advanced

Information

All Reset

Setting

:Move :Enter

:Exit

Enter

Exit

Item Description

Language Sets your preferred language for the OSD menu.

Schedule

• Date and Time: Sets the current date and time.

• Clock Display: Sets whether to show the current time on the screen.

• Input: Sets an input source to display when the display is automatically turned

on next time.

• On/Off Timer: Sets when to turn on or off the display.

Notes:

• Set the current date and time before you set the On/Off Timer.

• When schedule settings overlap, the Everyday setting takes priority over other weekly

settings.

Power Save

Sets the display to enter the power saving mode when there is no signal detected.

• Low: All sources can enter the power saving mode and wake up the display.

• High: All sources can enter the power saving mode, but only a VGA signal can

wake up the display or you have to press the power button to wake up the

display when other sources are connected.

• Off: If no source is detected, the backlight will continue on.

Notes:

• RS-232C can bring any mode out of the power saving status.

• On Power Save setting High, the LAN function is not available if the display enters Power

Save or DC off mode.

Control

Setting

• RS-232C/LAN: Sets a terminal to control the display.

• IR Passthrough: Select it when multiple displays are connected via RS-232C

cables.

- Primary: Designate the display as the primary unit for remote control

operation. Only this display will be operated by the remote control.

- Secondary: Designate the display as the secondary unit. The display can

not be operated by the remote control, and will only receive the control

signal from the primary display via the RS-232 connection.

Note:

• To reset to the default settings (RS-232C) for Control Setting, press the INFO button on

the remote control for 5 seconds.

Network

Settings

See "Network connection" on page 26 for details.