Manual

2-36 Chapter 2: Hardware information
12. ATX power connectors
(24-pin ATXPWR1, 8-pin ATX12V1)
These connectors are for an SSI & ATX power supply plugs. The power
supply plugs are designed to t these connectors in only one orientation. Find
the proper orientation and push down rmly until the connectors completely
t.
• DO NOT forget to connect the 24+8-pin power plugs; otherwise, the system
will not boot up.
• Use of a PSU with a higher power output is recommended when
conguring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
• Ensure that your power supply unit (PSU) can provide at least the minimum
power required by your system (450W or above; 12V1 & 12V2 ≥18A.).