User's Manual

6-6
第六章：安裝驅動程式
6.1.2 Windows
®
作業系統
在 Windows
®
作業系統安裝過程中
請依以下步驟在 Windows
®
作業系統安裝過程中安裝 RAID 卡驅動程式：
1. 用 Windows
®
作業系統安裝光碟片啟動系統。然後就會進入 Windows Setup
安裝畫面。
2. 當出現“Press F6 if you need to install a third party SCSI or RAID
driver...”的訊息時，請按下 <F6> 鍵。
3. 此時出現下一個畫面。按下 <S> 鍵來指定一個額外的裝置。
Windows Setup
S=SpecifyAdditionalDeviceENTER=ContinueF3=Exit
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage
devices(s):
<none>
* To specify additional SCSI adapters, CD-ROM drives, or special
diskcontrollersforusewithWindows,includingthosefor
whichyouhaveadevicesupportdiskfromamassstoragedevice
manufacturer, press S.
*Ifyoudonothaveanydevicesupportdisksfromamassstorage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver...