User's Manual
Table Of Contents
- 目錄內容
- 第一章:產品介紹
- 第二章:硬體裝置資訊
- 第三章:開啟電源
- 第四章:BIOS 程式設定
- 4.1 管理、更新您的 BIOS 程式
- 4.2 BIOS 程式設定
- 4.3 主選單(Main)
- 4.4 進階選單(Advanced)
- 4.4.1 處理器設定(CPU Configuration)
- 4.4.2 晶片組設定(Chipset)
- 4.4.3 Legacy 裝置設定(Legacy Device Configuration)
- 4.4.4 USB 裝置設定(USB Configuration)
- 4.4.5 PCI 隨插即用裝置設定(PCI PnP Settings)
- 4.4.6 電源設定(Power On Configuration)
- 4.4.7 事件記錄設定(Event Log Configuration)
- 4.4.8 系統監控功能(Hardware Monitor)
- 4.4.9 PCI Express 設定(PCI Express Configuration)
- 4.4.10 ACPI 設定(ACPI Configuration)
- 4.5 伺服器選單(Server)
- 4.6 啟動選單(Boot)
- 4.7 離開 BIOS 程式(Exit)
- 第五章:RAID 磁碟陣列設定
- 第六章:安裝驅動程式
- 附錄:相關資訊
華碩 Z8NA-D6 系列主機板使用手冊
4-33
晶片組 ACPI 設定(Chipset ACPI Configuration)
Energy Lake Feature [Disabled]
本項目提供您開啟或關閉 E n e r g y L a k e 功能。設定值有:[E n a b l ed]
[Disabled]
此項功能不建議選擇 Enabled(啟用)。
APIC ACPI SCI IRQ [Disabled]
本項目提供您開啟或關閉 APIC ACPI SCI IRQ 功能。設定值有:[Disabled]
[Enabled]
USB Device Wakeup From S3/S4 [Disabled]
本項目提供您開啟或關閉 US B 裝置從 S3/S4 喚醒功能。設定值有:
[Disabled] [Enabled]
High Performance Event Timer [Enabled]
本項目提供您開啟或關閉 High Performance Event Timer 功能。設定值
有:[Disabled] [Enabled]
HPET Memory Address [FED00000h]
設定值有:[FED00000h] [FED01000h] [FED02000h] [FED03000h]
一般 WHEA 設定(General WHEA Configuration)
WHEA Support [Enabled]
本項目提供您開啟或關閉支援 Windows Hardware Error Architecture
(WHEA) 功能。設定值有:[Disabled] [Enabled]
BIOS SETUP UTILITY
Advanced
SouthBridgeACPIConguration
EnergyLakeFeature [Disabled]
APIC ACPI SCI IRQ [Disabled]
USBDeviceWakeupFromS3/S4[Disabled]
High Performance Event Timer [Enabled]
HPET Memory Address [FED00000h]
Options
Enabled
Disabled
BIOS SETUP UTILITY
Advanced
GeneralWHEAConguration
WHEA Support [Enabled]
En a b l e o r d isa b l e
Windows Hardware Error
Architecture.