User's Manual
Table Of Contents
- 目錄內容
- 第一章:產品介紹
- 第二章:硬體裝置資訊
- 第三章:開啟電源
- 第四章:BIOS 程式設定
- 4.1 管理、更新您的 BIOS 程式
- 4.2 BIOS 程式設定
- 4.3 主選單(Main)
- 4.4 進階選單(Advanced)
- 4.4.1 處理器設定(CPU Configuration)
- 4.4.2 晶片組設定(Chipset)
- 4.4.3 Legacy 裝置設定(Legacy Device Configuration)
- 4.4.4 USB 裝置設定(USB Configuration)
- 4.4.5 PCI 隨插即用裝置設定(PCI PnP Settings)
- 4.4.6 電源設定(Power On Configuration)
- 4.4.7 事件記錄設定(Event Log Configuration)
- 4.4.8 系統監控功能(Hardware Monitor)
- 4.4.9 PCI Express 設定(PCI Express Configuration)
- 4.4.10 ACPI 設定(ACPI Configuration)
- 4.5 伺服器選單(Server)
- 4.6 啟動選單(Boot)
- 4.7 離開 BIOS 程式(Exit)
- 第五章:RAID 磁碟陣列設定
- 第六章:安裝驅動程式
- 附錄:相關資訊
4-34
第四章:BIOS 程式設定
4.5.1 遠端存取設定 (Remote Access Configuration)
本項目可讓您設定遠端存取功能。選擇本項目並按下 <Enter> 鍵可顯示設
定選項。
Remote Access [Enabled]
本項目可開啟或關閉遠端存取功能。設定值有:[Disabled] [Enabled]
當 Remote Access 設定為 [Enabled] 時,以下項目才會出現。
4.5 伺服器選單(Server)
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Server BootExit
RemoteAccessConguration
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10SaveandExit
ESCExit
CongureRemote
Access.
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Server
CongureRemoteAccesstypeandparameters
Remote Access [Enabled]
Serial port number [COM2]
Base Address, IRQ [2F8h, 3]
Serial Port Mode [57600 8,n,1]
Flow Control [Hardware]
Redirection After BIOS POST [Disabled]
Terminal Type [VT-UTF8]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10SaveandExit
ESCExit
Select Remote Access
type.