User Manual

4-42
第四章：BIOS 程序設置
4.7.1 CSM 參數（CSM parameters）
按下 <Enter> 以更改 CSM 參數設置。
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Boot
This option controls if CSM
will be launched.
Launch CSM [Always]
Boot option lter [UEFI and Legacy]
Launch PXE OpROM policy [Legacy only]
Launch Storage OpROM policy [Legacy only]
Launch Video OpROM policy [Legacy only]
Other PCI device ROM priority [Legacy OpROM]
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Launch CSM [Always]
本項目確定是否啟動 CSM。設置值有：[Auto] [Always] [Never]
Boot option filter [UEFI and Legacy]
本項目控制系統可啟動至什麼設備。設置值有：[UEFI and Legacy]
[Legacy only] [UEFI only]
Launch PXE OpROM policy [Legacy only]
控制 UEFI 與 Legacy PXE OpROM 的執行。設置值有：[Do not
launch] [UEFI only] [Legacy only] [Legacy first] [UEFI first]
Launch Storage OpROM policy [Legacy only]
控制 UEFI 與 Legacy Storage OpROM 的執行。設置值有：[Do not
launch] [UEFI only] [Legacy only] [Legacy first] [UEFI first]
Launch Video OpROM policy [Legacy only]
控制 UEFI 與 Legacy Video OpROM 的執行。設置值有：[Do not
launch] [UEFI only] [Legacy only] [Legacy first] [UEFI first]
Other PCI Device ROM priority [Legacy OpROM]
決定除網絡、大容量存儲設備或視頻之外的其他 PCI 設備啟動哪個
OpROM。設置值有：[UEFI OpROM] [Legacy OpROM]