User Manual
4-44
第四章:BIOS 程序設置
4.9 安全性菜單(Security)
此菜單用於更改系統安全性。
若您忘記 BIOS 密碼,請清除 CMOS 實時鐘 (RTC) RAM 以清
除 BIOS 密碼。請參閱“2.6 跳線選擇區”一節中關於清除 RTC
RAM 的說明。
管理員密碼(Administrator Password)
若您已經設置了一個管理員密碼,建議您輸入管理員密碼來進入系統。
否則,您只能看到或變更 BIOS 設置程序中的部分內容。
請依照以下步驟設置系統管理員密碼:
1. 選擇【Administrator Password】項目並按下 <Enter>。
2. 在“Create New Password”窗口出現時,輸入欲設置的密碼,輸入完
成按下 <Enter>。
3. 在彈出的確認窗口中再一次輸入密碼以確認密碼正確。
請依照以下步驟變更系統管理員密碼:
1. 選擇【Administrator Password】項目並按下 <Enter>。
2. 在“Enter Current Password”窗口出現時,輸入現在的密碼,輸入完
成按下 <Enter>。
3. 在“Create New Password”窗口出現時,輸入欲設置的新密碼,輸入
完成按下 <Enter>。
4.
在彈出的確認窗口中再一次輸入密碼以確認密碼正確。
若要清除管理員密碼,請依據變更管理員密碼相同步驟操作,但在確認
窗口出現時直接按下 <Enter> 鍵以創建/確認密碼。
Set Setup Administrator
Password
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Event Logs Boot Monitor Security Tool Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights
The password length must br in the following
range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
UEFI Secure Boot Management
Secure Boot control [Disabled]
Key Management