User Manual

華碩 Z9PA-D8 系列主板用戶手冊
4-33
4.4.14 板載設備設置（Onboard Devices Configuration）
Serial Port 1/2 Configuration
Serial Port [Enabled]
允許您開啟或關閉串口。設置值有：[Disabled] [Enabled]
4.4.13 ME 子系統（ME Subsystem）
Intel ME Subsystem Conguration
ME BIOS Interface Version 1.2
ME Version 2.1.5.95
ME FW Status Value : 0xf0345
ME FW State : SPS ME FW Active
ME FW Operation State: M0 without UMA
ME FW Error Code: No Error
ME Ext FW Status value: 0x3000e301
BIOS Booting Mode: Performance Optimized
Cores Disabled: 0
ME FW SKU Information: SiEn NM
End-of-POST Status: E0P disabled in POST
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
ME Subsystem Help.
Serial Port 1 Conguration
Serial Port 2 Conguration
Asmedia USB 3.0 Controller [Enabled]
Asmedia USB 3.0 Battery Charging S [Enabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Set Parameters of serial
Port 1(COM1).
Serial Port Conguration
Serial Port [Enabled]
Device Settings I0=2F8h; IRQ=3;
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Enable or Disable Serial
Port(COM).