Quick start guide CL82109/CL82209/CL82309/ CL82359/CL82409/CL82509/ CL82609/CL82659/CL82859 DECT 6.
Installation You must install and charge the handset battery before using the cordless handset. STOP! See page 3-4 for easy instructions. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall. For optimum range and better reception, place the telephone base in a central and open location.
Telephone base & charger installation Install the telephone as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, see user’s manual for details. 1. Plug one end of the telephone line cord into the telephone jack on the bottom of the telephone base. 2. Route the power adapter cord through the slot. 3. Plug the small end of the telephone base power adapter into the power jack on the bottom of the telephone base. 7. Raise the antenna. 4.
Battery installation & charging Install the battery as shown below. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on the Technical specifications page of the user’s manual for battery operating times.
Battery installation and charging Step 3 Charge the handset by placing it face up in the telephone base or charger. The CHARGE light on the top of the handset is on during charging. IMPORTANT INFORMATION 1. Use only the supplied rechargeable battery or replacement battery (model BT8001). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2.
Quick reference guide - handset MENU/SELECT CHARGE indicator Press to show the menu. While in the menu, press to select an item or save an entry or setting. On when the handset is charging in the telephone base or charger. TCID/-VOLUME DIRS/+VOLUME Press TCID to display caller ID history. Press DIRS to show directory entries. Press to scroll down while in menus. Press to scroll up while in menus. While entering names or numbers, press to move the cursor to the left.
Quick reference guide - handset Main menu > shows a highlighted item Main menu ANS. SYSTEM DIRECTORY ?!BOT/TZTUFN ?!BOT/TZTUFN EJSFDUPSZ EJSFDUPSZ CALL LOG RINGER VOLUME RINGER TONE KEY TONE LCD LANGUAGE SET DATE/TIME CLR VOICEMAIL HOME AREA CODE Menu Using menus Press MENU/SELECT to show the first menu item, ANS. SYSTEM. Press TCID or DIRS to scroll through menu items. Press MENU/SELECT to select or save changes to a highlighted menu item.
Quick reference guide - telephone base IN USE indicator On when the handset is in use, when the answering system is answering an incoming call or when you are registering a handset. VOICEMAIL indicator Flashes when you have new voicemail. Voicemail service is offered by your local telephone company, and is different from answering system messages. Flashes when another telephone is in use on the same line, or when you are deregistering handset(s) from the telephone base.
www.telephones.att.com © 2008-2009 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Issue 4 AT&T 09/09.