User`s manual

Page Page
Operational Instructions Operational Instructions
Operation with iPhone or iPod
Using the Audio Line in Connection (AUX-INPUT)
Music Equalizer
- Turn on the docking station and the iPhone or iPod.
- Insert the iPhone or iPod into the docking station.
- Press the FUNC./CL-SET button repeatedly until the display shows “iPod”.
- Press the button on the docking station to begin playback.
- The iPhone/iPod display will indicate the information of the current song.
- At anytime during playback, press the button to pause playback.
Press button to resume playback of the same song and position.
- At anytime during playback, press and release the and buttons to skip forward or
backwards by one song, as desired.
- At anytime during playback, press and hold the and buttons to fast-forward (cue) or
fast-reverse (review) the current song.
- You can operate the iPhone/iPod using either the docking station’s buttons, or directly
with the iPhone/iPod itself.
- When your iPhone/iPod is connected to the docking station, it will start charging the
battery of the iPhone/iPod.
- It is recommended that playback of your iPhone/iPod be paused before removing it from
the docking station to prevent damage to your song files.
- You can connect the audio input of an external device, such as a MP3 player or a TV, to
coolBlu for listening to the sound of that device through the high quality amplifier of the
docking station.
- To connect the external device, use a standard stereo headphone (3.5 mm) cable.
Connect the “HEADPHONE-OUT” or “AUDIO LINE-OUT” of the device to the AUX-INPUT
socket of this docking station.
- Switch on the docking station and the external device (eg. MP3-player or TV).
- Switch the function to AUX using the FUNC./CL-SET button.
- Start playback of the external device and adjust the volume control of the docking
station to the desired level.
- Remember to switch off the docking station when you are finished using the external
device.
At anytime during playback, press the EQ/SLEEP button repeatedly to choose the desired
sound effect according to the music you are listening to :
“Made for iPhone” and “made for iPod”, means that an electronic accessory has been
designed to connect specifically to iPhone and iPod respectively, and has been certified
by the developer to meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPhone and iPod may affect wireless
performance.
E-0 = EQ OFF E
•
1 = CLASSIC
E
•
4 = POP
E
•
2 = JAZZ
E
•
3 = ROCK
16 17
 
MEMORY
AL-MODEFUNC.
EQ
 
MEMORY
AL-MODEFUNC.
EQ
 
MEMORY
AL-MODEFUNC.
EQ
 
MEMORY
AL-MODEFUNC.
EQ
 
MEMORY
AL-MODEFUNC.
EQ
 
MEMORY
AL-MODEFUNC.
EQ
 
MEMORY
AL-MODEFUNC.
EQ