user manual

Assembly Instructions:
1. Connect the lower pole (8) to the base (10) with
fasteners (9)
2. Insert the upper adjustable pole (7) into lower pole
(8), then adjust it to the height you want by tightening
the knob. In the future, you can adjust fan height by
loosening & tightening this knob.
PLEASE NOTE THAT ADJUSTABLE SPRING MUST BE
PUT INSIDE OF LOWER POLE (8)
3. Mount the motor (5) on upper adjustable pole (7) affix
with fasteners (6)
4. Connect the rear guard (4) to motor (5) with washers
and nuts.
5. Attach the fan blade (2) onto motor shaft with screw.
6. Connect the front guard (1) with rear guard with clip
(4)
Operating Instructions:
1. Connect power plug to any standard 120V AC outlet. Caution: Make sure control is in the “0”(off) position.
2. The fan has three different speeds. Pull power chain once to operate the low speed and allow to operate for 10
seconds.
3. Once 10 seconds have passed , you can now pull the power chain to the medium or high position.