User's Manual

2
Model
Boom
Position
Capacity
Boom Length
ATD-10141
1
SPECIFICATIONS
Max. Hook HeightMin. Hook Height
1 Ton
18-1/2"
10"
77-1/4"
88-1/4"
84-1/2"
80-3/4"
66-1/8"
4
"4/3 25noT 2
59-1/2"14-1/8"1 1/2 Ton2
3
72-7/8"5-7/8"1/2 Ton
PRODUCT DESCRIPTION
ATD Engine Crane is designed to safely lift and lower rated capacity engines. Welded steel tube construction, heavy
duty chain and safety hook, steel casters and wheels ensure safety, strength and stability.
Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack.
The owner and operator of this equipment shall have an understanding of this engine crane and safe operating procedures
before attempting to use. The owner and operator shall be aware that use and repair of this product may require special
skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language before
use of this jack is authorized. If any doubt exists as to the safe and proper use of this product, remove from service
immediately. Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any crane
that appears damaged in any way, or operates abnormally shall
be removed from service immediately. If the engine
crane has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly),
immediately discontinue use until product has been checked by an authorized service center. It is recommended that
an annual inspection be done by qualified personnel. Labels and Owners Manuals are available from manufacturer.
Boom extension
Rear caster
Middle
caster
Leg extensions
Upright
Support strut
Boom
Crane handle
Hydraulic unit
Chain/hook
assembly
Front caster
Handle
Base
Leg holder
Figure 1 - Engine Crane Nomenclature