Atech Flash Technology, Inc.
Congratulations Congratulations on the purchase of your new XM-28U USB media reader/writer. XM-28U is able to support multiple formats of flash media cards. This guide will explain the features and specifications of your new media reader, as well as the installation in a few simple steps. Please retain this guide for further reference. Convenient features like fully Plug-and-Play make it easy to setup XM-28U in your kiosk or computer system.
Package Contents XM-28U Internal USB 2.0 Cable - Connects XM-28U to USB pin headers on motherboard. To Reader Unit or for Front USB port To motherboard USB pin headers (5-pin) External USB 2.0 Cable - Connects from XM-28U unit to any available USB port in Computer.
Installation Windows 98SE or Windows 2000 users: Driver installation is required. Please perform software setup first before using the XM-28U. This is an USB 2.0 device and it is backward compatible with USB 1.1 interface. However, USB 1.1 performance can only be expected when connected to a USB 1.1. port. When the unit is connected to a USB 1.1 port, the following Windows message may appear: "A HI-SPEED USB device is plugged into a non-HI-SPEED USB hub.
4 AFT Custom Drivers Read only Drivers are available so that all media cards that are inserted are Read Only for security purposes. AFT Custom Icons (for Windows XP/ME/2000/98SE) AFT Custom Icons, are available. An example: Insert Memory Card and click on the Icon that matches your memory card.
Using XM-28U 5 Using XM-28U is similar to using a floppy drive. Simply insert your media card into the slot and click on the appropriate Removable Disk icon in My Computer, it will allow you to access your media card like a disk. XM-28U USB 2.0 SD/Mini/MMC/RS CF/MD mini xD MS/PRO/Duo /SM Ultra XM-28U We strongly recommend that you copy the files in the media card to your computer first before attempting to view or make any changes to the files.
Specifications 6 Dimension (W x H x D): 4.02 inch x 1 inch x 4.
