User's Manual
LTE CPE（J912）User Manual
12/08/21
10
3.4.2.2Routing
From the rule table, you can see the default route information. Clicking on the
“Add New” button, you can configure the static routing setting. The new rules will
be show n on t he ru le ta b le, h e re yo u can de le t e t h e r u le s t ha t yo u h a ve s e le c te d o r
add new rules sequentially. The maximum rule count is 10.
Destination:The address of the network or host that assigned by the static
route;
Range: Host/Net;
Gateway:This is the IP address of the gateway device that is used to contact
between the router and the network or host;
Interface: LAN/WAN/Custom;
RIP: Enable the RIP, every 30 seconds, the system will update and learn the
routing information nearby automatically.
3.4.2.3NTP
From this page, you can set the Current Time, Time Zone, NTP Server and NTP
synchronization. When the device obtains the WAN IP, the current time will
synchronize with the NTP server automatically.