Installation Guide
LED Linear Strip
Indoor
Series Wattage CCT Voltage Dimming Lens Finish Color
LNS=Linear Strip -40=40W
-40=4000K
-50=5000K
Blank=100-277V
-V=347-480V
Blank=1-10V Dimming
-ND=Non-Dimming
-F=Frosted Lens
-C=Clear Lens
-XX
Blank=Standard
Sample Order: LNS-4FT-40-40-F
ATG Electronics®
Industry Leading 10 Year Limited Warranty
For North American LED Lighting Fixtures
ATG Electronics warrants to the original purchaser of ATG Electronics Domestic LED products listed above that were manufactured for which the ATG Electronics Spec Sheet located on our website contains the words “10
year limited warranty” that, subject to the below terms and conditions of this warranty, when such LED products are properly installed they will comply with ATG Electronics published product specications for such products
and will be free from material defects in material and workmanship for a period of ten (10) years from the date of sale by ATG Electronics, or, if lesser, 50,000 hours of operation (at an average of 13.6 hours per day operation).
e LED arrays in the Product(s) will be considered defective in material or workmanship only if a total of 15% or more of the individual light emitting diodes in the Product(s) fail to illuminate.
e above express limited warranty is extended by ATG Electronics® only to the original or rst end-user purchaser and only for the original installed location. is warranty only applies to products purchased aer June 1,
2017. is warranty is non-transferrable, whether by assignment or operation of law. e original purchaser must provide warranty claims to ATG Electronics within the warranty period promptly upon discovery and in accor-
dance with ATG Electronics Return and Repair Procedures as outlined within this document.
Should any defects be found by ATG Electronics upon its inspection of the properly returned product, ATG Electronics sole responsibility and liability under this warranty will be, at its option, to either repair or replace the
defective part or parts or else make available a new replacement unit that will provide equal or better performance. All decisions regarding the existence or non-existence of defects or otherwise aecting the warranty shall be
made by ATG ELECTRONICS and shall be nal and binding on all parties. Where a defective LED product is replaced under this warranty, the balance of the original warranty period shall remain eective.
Conditions and Exclusions
is warranty is conditioned upon proper installation, use and maintenance. is warranty will automatically become null and void and shall not be applicable to any LED xture which (i) has not been timely paid for, (ii) is
not installed and operated in accordance with the current edition of e National Electric Code (NEC), the Standards for Safety of Underwriters’ Laboratory, Inc. (UL) or with ATG Electronics instructions and guidelines, (iii)
has been moved from its original installation, (iv) has been installed within an area that has exposure to sulfur or any area with high acidic compounds in use, (v) has been operated in an ambient temperature or humidity that
is higher than 35 degrees Celsius, (vi) has been subjected to a lightning strike, power surge or overvoltage condition, (vii) has its LED Board subjected to static electricity due to failure to discharge same prior to connecting or
disconnecting the lead from the LED board, (viii) was not installed and/or operated in accordance with ATG Electronics instructions and guidelines, (ix) has been mishandled, misused, abused, tampered with, modied or
altered by anyone other than ATG ELECTRONICS, (x) has been subjected to abnormal stresses and operating conditions, or (xi) has been operated without overvoltage and lightning protection devices in place.
Limitations
Disclaimers & Limitations of Liability
e foregoing warranty is exclusive of all other statutory, written or oral warranties and no other warranties of any kind, statutory, by operation of law or course of performance, or otherwise, are given, herein expressed or oth-
erwise received. EXCEPT AS EXPRESSLY PROVIDED ABOVE, ATG ELECTRONICS DISCLAIMS ALL REPRESENTATIONS, WARRANTIES AND CONDITIONS OF ANY KIND, EXPRESS OR IMPLIED, REGARDING
THE LED PRODUCTS AND ITS SERVICES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE OR PURPOSE.
LIMITATION OF LIABILITY. Other than the obligation to repair or replace as provided above, ATG Electronics shall have no liability for any losses, expenses or damages as a result of the installation, use, inability to use, re-
moval or replacement of any LED product. ATG Electronics will not under any circumstances whether as a result of breach of contract, breach of warranty, tort, strict liability or otherwise be liable for consequential, incidental,
special or exemplary damages including but not limited to, loss of prots or revenues, loss of any other goods or associated equipment or damage to any associated equipment, cost of capital, cost of substitute products, facilities
or services, down time cost or claims of claimant’s customers. ATG Electronics liability on any claim of any kind for any loss or damages arising out of, resulting from or concerning any LED product, any aspect of this warran-
ty or for any products or services furnished hereunder shall not exceed the price of the xture which gives rise to the claim.
Return and Repair Procedures
All warranty requests and or questions are to be directed to ATG Electronics Customer Service Department (CSD) at 888-618-7298. If deemed necessary, the CSD will issue a Returned Merchandise Authorization (RMA)
number which must be included on both the packing slip of the component or xture being returned and on the outside of the box. You must include your name and contact information, including your email address, on
the packing slip so that we can contact you easily. Each component or xture must be packaged very carefully and properly so as to prevent damages in shipment and must be shipped freight prepaid. Please obtain a proof of
delivery to ensure that the material is received.
Once the component or xture has been received and tested, an evaluation report will be provided to the end user via email. is report will clarify the following:
A) e component / xture is covered under the warranty policy and will either be repaired or replaced.
B) e component / xture is not covered under the warranty policy and the reason for this determination.
If ATG ELECTRONICS determines that the component or xture is covered under the warranty, then the appropriate repairs will be started or a replacement xture will be manufactured and shipped. Please note that in the
event the returned component or xture is found not to be covered under this warranty, you may be subject to a labor charge for the evaluation process and will be responsible for all return shipping charges and fees. For com-
ponents and xtures determined to be covered under this warranty prior to the rst anniversary of the Sale Date, the repaired or replacement component or xture will be returned to you at no charge. You will be responsible
for all other shipping charges.
No Labor Reimbursement
All components and xtures determined to be covered by this warranty as provided above, will be repaired or replaced at no charge to the customer, however, except as expressly provided above with respect to recessed and
linear xtures during the rst year, the customer must hire and pay for an electrician to remove and reinstall such components and xtures. No labor costs will be covered for the removal or reinstallation of any components or
xtures. e warranty does not cover modications, repairs or replacements, or the related labor or materials costs, that may be necessary to facilities or third party products in connection with the removal, repair, or replace-
ment of any LED product under this warranty.
© 2018 ATG Electronics. Data subject to change. Version 6 June 2018 www.atgelectronics.com
Sample Order