User's Manual

22 23
ENGLISH
– Con rm the pairing request on the phone screen, then pairing will com-
plete. Otherwise, please follow the general steps to complete pairing
procedure.
General procedure
– Hold the BT Drive Free 414 within range of a Bluetooth-ready cell phone;
the distance should not exceed a metre.
– The BT Drive Free 414 must be switched o .
– Press the MF button for approx. 6 seconds until you hear a low-pitched
signal tone and the MF button intermittently  ashes red and blue. The
device is in registration mode.
– Activate the Bluetooth function of the cell phone and start the search for
Bluetooth devices. (For further details, please read the operating instruc-
tions of your cell phone).
– From the list of devices found, select the "BT DF 414".
– If required, enter the PIN code "0000" and con rm the entry. If the pairing
process was successful, you hear a signal tone and the MF button lights
blue for 3 seconds. (Note: The PIN code is preprogrammed and cannot
be changed.)
– After registering, the BT Drive Free 414 automatically connects with the
cell phone. For some cell phones, you have to manually con rm the con-
nection. Next, the BT Drive Free 414 changes to standby mode and the
MF button  ashes blue every 3 seconds.
Note: If the registering is not completed within 2 minutes, the BT Drive Free 414
switches o again. In this case, repeat the registering.
Multi-connection function
The multi-connection function allows the simultaneous use of the
BT Drive Free 414 with two cell phones. This is advantageous for users with
a personal and a business cell phone.
Establishing a connection with two cell phones
There are several options of connecting the BT Drive Free 414 with already
registered cell phones.
– Automatic connection
When switching on the BT Drive Free 414, a connection is automatically
established with the two most recently connected cell phones.
– Establishing a connection via the BT Drive Free 414
To manually establish a connection between the BT Drive Free 414 and
the two most recently connected cell phones, press the MF button. The
BT Drive Free 414  rst connects itself with the most recently connected
cell phone. Then it connects itself with the next most recently connected
one.
– Establishing a connection via the cell phone
If the cell phone is not one of the two most recently connected cell phones
with the BT Drive Free 414, you have to establish the connection via the
Bluetooth menu of the cell phone. After successful connection, you can
establish another connection with a second cell phone. This allows you
to determine the sequence of connections.
If two cell phones are connected with the BT Drive Free 414, the cell phone
connected  rst is the  rst device and the other one the second device. Another
connection can be established only after  rst disconnecting one of the two
cell phones. The cell phone which is still connected afterwards becomes the
 rst device in the sequence.
Note that voice dialing is available only for the  rst device and the operation
for redialling the last number di ers for the  rst and the second device. The
other functions are executed the same way using the BT Drive Free 414 as a
connection with only one cell phone.
02_BTDriveFree414_gb.indd 22-2302_BTDriveFree414_gb.indd 22-23 19.11.14 11:4219.11.14 11:42