User`s guide

Installing the ATI-TV Card
2-5
Installing the Software
Before installing the software, you must have ATI’s mach64 enhanced
graphics driver version 2.2 or greater installed on your system. For more
information about installing enhanced drivers, see the User’s Guide for
your ATI graphics accelerator.
To install the ATI VIDEO PLAYER from CD-ROM
1. Insert the ATI INSTALLATION CD-ROM into your CD-ROM drive.
If Windows 95 runs the ATI INSTALLATION CD-ROM automatically,
proceed to step 5.
2. In Windows 95, click Start.
or
In Windows 3.1x, pull-down the File menu in the Program Manager.
3. Select Run.
4. Type the following:
D:\ATISETUP
(If D is not your CD-ROM drive, substitute D with the correct drive
letter.)
5. Click ATI VIDEO PLAYER.
6. Follow the on-screen instructions to complete the installation.
To install the ATI VIDEO PLAYER from diskette
1. Insert the diskette labeled ATI VIDEO PLAYER into the disk drive.
2. In Windows 95, click Start.
or
In Windows 3.1x, pull-down the File menu in the Program Manager.
3. Select Run.
4. Type the following:
A:\SETUP
(To install from drive B, substitute B: for A:)
5. Follow the online help instructions to complete the installation.
generic.bk : 02_inst.fm Page 5 Thursday, June 20, 1996 4:10 PM