User`s guide

Installing the ATI-TV Card
2-2
Installing the ATI-TV Card
1. Power-off the computer, then disconnect the power cable.
2. Remove the computer cover. If necessary, consult your computer
system manual for removal instructions.
Remember to discharge your body’s static electricity by touching the
metal area of the computer chassis.
3. Select an empty ISA expansion slot for the ATI-TV card.
4. With the slot cover removed, grasp the card by the top edge and
carefully seat it firmly into the slot.
5. Fasten the retaining bracket with a screw.
Installing the AMC Cable
1. Locate the AMC Connector on your ATI graphics accelerator. (See
the Diagram below.)
If your computer system already has an AMC connector, then you can
connect the ATI-TV directly into your motherboard. Please see your
system documentation for more information.
2. Align the red stripe on the ribbon cable from the ATI-TV card with
pin 1 of the AMC Connector.
• The red stripe on the ribbon cable indicates the pin 1 position.
• The ribbon cable must not be longer than 10 inches.
PCI Connector
AMC Connector
Video
Output
Connector
Pin 1
Your ATI graphics
accelerator may not
look exactly as shown.
generic.bk : 02_inst.fm Page 2 Thursday, June 20, 1996 4:10 PM