User`s guide

Installing the ATI-TV Card
2-3
3. Pressing gently, connect the ribbon cable to the AMC connector on
the ATI graphics accelerator.
4. Re-install the computer cover.
5. Connect your TV cable or video input to the ATI-TV card. For more
information about the connectors on the ATI-TV, please see “ATI-TV
Connectors” on page 2-4.
Connecting the Audio
If you have a sound card
1. Looking at the back of your computer, locate the audio out connector
on the ATI-TV card.
2. Locate the line in connector on your sound card. If necessary, refer to
the documentation supplied with your sound card.
3. Attach one end of the sound cable to the Audio out on the ATI-TV and
the other end to the Line in on your sound card. (see diagram below)
If you have an amplified speaker system
If you have an amplified speaker system, you can simply connect the
speakers to the audio out on the ATI-TV card.
Sound Card
ATI-TV
Line in
Your sound card may
not look exactly as shown.
Audio
Out
generic.bk : 02_inst.fm Page 3 Thursday, June 20, 1996 4:10 PM