Atik Series 4 User Manual Version 1.
Table of Contents Introduction .................................................................................................................... 3 Further information ........................................................................................................ 3 Pack Contents................................................................................................................. 4 Getting to know your camera ..............................................................................
1 Introduction Congratulations on your purchase of an Atik Series 4 camera. This manual will help you get the most out of your Atik camera: please take the time to read it thoroughly, and you will be ready to discover new worlds. Atik cameras provide exceptional value for money, superior performance and unrivalled ease of use. Our cameras are the result of extensive research and development, each one having been designed and built with the requirements of the most demanding astro-imager in mind.
2 Pack Contents This pack includes: 1. 2. 3. 4. 5.
3 Getting to know your camera 3.1 Camera Parts 1. 2. 3. Mini USB port 2.1mm centre-positive 12V DC input Desiccant port 3.
3.3 Optical Window The optical window used in front of the CCD is a BK7 with BBAR coatings on both sides ensuring that no reflection will appear in your image. 3.4 Analog to Digital Converter (ADC) The Analog to Digital Converter (ADC) is a 16-bit ADC. This means that your Atik camera will allow you to record subtle levels of gray, providing you with enhanced dynamic range when capturing an image. 3.
- it with a fresh one. Replace the port cover and tighten (no need to overtighten). Wait 24 hours before connecting the camera again. To recharge the desiccant, place the tablet in an electric oven at 200ºC for a couple of hours. Take it from the oven, wait a few minutes for it to cool down slightly, then put it back in the camera and wait 24 hours. You will notice that there is a filter inside the desiccant chamber.
5 Declaration of Conformity EU Declaration of Conformity. This product carries the CE Mark in accordance with the related European Directive. CE Marking is the responsibility of: Perseu, SA R. Dr. Agostinho Neto, 1D 2690-576 Sta Iria da Azoia Portugal Critical Applications. This product is not designed for any “critical applications”.
6 Warranty The equipment is guaranteed against defective design, manufacture or materials for a period of one year from the date of purchase. This means that Atik Cameras will repair or replace the equipment at its sole option, at no charge to the purchaser for parts or for labour, if the fault is reported within the guarantee period, provided however that Atik Cameras is able to duplicate the defect or problem at its facilities.