Operation Manual
14
Cleaning the bag
Empty the bag every time after it has been used.
1. Shake the bag thoroughly.
2. Turn it inside out and brush the bag out thoroughly.
3. Wash the bag when extremely soiled or at least once a year, by hand in mild soap suds.
L If the zip fastener is stiff, rub dry soap into the zip.
For your own safety, regularly check the bag for any signs of damage. Always replace a damaged bag immediately.
P
P
o
o
s
s
s
s
i
i
b
b
l
l
e
e
p
p
r
r
o
o
b
b
l
l
e
e
m
m
s
s
Problem possible cause remedy
Motor won't start
⇒ No mains power (power failure)
⇒ Connection lead defect
⇒ Cleaning flap not closed (safety cutout
triggered)
⇒ Motor or switch defect
⇒ Check fuse (10 A)
⇒ Replace lead or have lead checked
(electrician)
Never use defect lead
⇒ Close cleaning flap
⇒ To solve the problem, contact the
manufacturer or an authorised
company (see customer service list)
Material is not sucked in properly (reduced
vacuuming power)
⇒ Machine is clogged or blocked
⇒ Bag too full
⇒ Speed setting too low (only for garden
vacs with fully variable speed control)
⇒ Extension cable too long, or cross-
section too small. Socket too far away
from main connection, and cross-
section of connection lead too small.
⇒ Clean inside of machine
⇒ Empty bag
⇒ Adjust to higher speed
⇒ Extension cable at least 1,5 mm
2
,
maximum 25 m long. Cross- section of
at least 2,5 mm
2
in longer cables.
G
G
u
u
a
a
r
r
a
a
n
n
t
t
e
e
e
e
• The machine is guaranteed for a period of 2 years from the date of purchase/delivery against faults due to material or
manufacturing errors.
• The guarantee is rendered invalid in the event of any damage caused due to improper use or handling, improper packaging
when returning the machine or failure to observe the operating instructions.
• Faulty parts must be returned to our works carriage-paid. The decision on free replacement of faulty parts will be made at our
discretion.
• The guarantee does not cover normal wear of the shredder turbine and bag.
• Any guarantee work will be carried out by the manufacturer. Our express approval must be obtained before having any such
work carried out by another company.
• The guarantee only remains valid provided that original replacement parts are used.
• All plastic parts are marked for pure grade recycling. Please contact the manufacturer for recycling machines which can no
longer be used. The manufacturer will inform you of the current recycling costs.
• We reserve the right to make technical changes in the course of technical progress.