Assembly Instructions 2

ManualsBrandsAtlantic Furniture ManualsBedsQueen Size Storage Bed Caramel Latte

ASSEMBLY INSTRUCTION

( QUEEN E-65403, KING E-65503 )

Before assembling your bed slat kit, please read through these

instructions carefully and familiarize yourself with the different parts.

PARTS LIST

HARDWARE

Step 1

Step 2

SLAT SECTION

SUPPORT RAIL

TALL SUPPORT LEG

SHORT SUPPORT LEG

2 SET

2 PCS

4 PCS

Allen wrench

Phillips

Customer supplied

screw driver

Please note that you will require a Phillips screwdriver and an Allen wrench.

Allen wrench

1 1/2” Allen screw - 8 pcs

Spare - 1 pc

1 1/4” Wood screw - 8 pcs

Spare - 2 pcs

Allen wrench - 1 pc

Spare - 1 pc

Assemble support legs (03 or 04) and support rail (02).

Using Allen screw (A).

Tighten with the Allen wrench (C).

Repeat for other support rail.

Page 1 of 2

SLAT KIT QUEEN OR KING

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE

ALLEN WRENCH, ALLEN SCREW, OR WOOD SCREWS

ARE DAMAGED DURING ASSEMBLY.

Assemble bed frame according to assembly instructions.

If using mattress and foundation set the bed up low and use short support leg (04).

If using storage drawers choose the tall support leg (03).

ATTENTION! If you receive a damaged or defective item,

please contact Atlantic Furniture at service@atlanticfurniture.com or 1-800-955-3726

03 / 04

2 1/2” Allen screw

READY

ASSEMBLE

PO :

Adult assembly

Summary of content (2 pages)

PAGE 1
SLAT KIT QUEEN OR KING ASSEMBLY INSTRUCTION READY ( QUEEN E-65403, KING E-65503 ) TO Before assembling your bed slat kit, please read through these instructions carefully and familiarize yourself with the different parts. Please note that you will require a Phillips screwdriver and an Allen wrench. ATTENTION! If you receive a damaged or defective item, please contact Atlantic Furniture at service@atlanticfurniture.
PAGE 2
SLAT KIT QUEEN OR KING A Step 3 Lay the slat section (01) onto the bed. Attach support rail assembly (02) to slat section (01). Using Allen screw (A), tighten with the Allen wrench (C). Repeat for section 2. A 01 A A 02 SECTION 1 1 1/2” Allen screw SECTION 2 C Allen wrench Adult assembly Step 4 Be sure to align slat section evenly with both ends of side rail. Screw slat section (01) to side rail, using wood screw (B). Tighten with Phillips screwdriver. (Customer supplied).