ITALIANO Questo prodotto è coperto da garanzia Atlantis della durata di 2 anni. Per maggiori dettagli in merito o per accedere alla documentazione completa in Italiano fare riferimento al sito www.atlantis-land.com. ENGLISH This product is covered by Atlantis 2 years warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using this device, please refer to the online manual.
ITALIANO 1. PANORAMICA DI PRODOTTO ............................................................ 10 1.1 Requisiti di sistema .................................................................... 11 1.2 CONTENUTO DELLA CONFEZIONE .............................................. 11 1.3 I LED frontali ............................................................................. 11 1.4 Le porte posteriori ..................................................................... 12 1.5 Cablaggio ........................
Configuring PC (WindowsXP).......................................................... 31 Configuring PC (Windows Vista) ..................................................... 31 Configuring PC (Windows 7)........................................................... 31 2. Configuring NetFly AP4 ..................................................................... 32 2.1 Browser configuration ................................................................ 32 2.2 Switching between Operating Modes ................
AVVERTENZE Abbiamo fatto di tutto al fine di evitare che nel testo, nelle immagini e nelle tabelle presenti in questo manuale, nel software e nell'hardware fossero presenti degli errori. Tuttavia, non possiamo garantire che non siano presenti errori e/o omissioni. Infine, non possiamo essere ritenuti responsabili per qualsiasi perdita, danno o incomprensione compiuti direttamente o indirettamente, come risulta dall'utilizzo del manuale, software e/o hardware.
riconoscimento. Dopo l’installazione, la periferica è stata trovata conforme ai seguenti standard: EN 300.328(radio), EN 301 489-1, EN 301 489-17(compatibilità elettromagnetica) ed EN 60950(sicurezza).
Importanti informazioni riciclaggio/smaltimento di questa apparecchiatura per il corretto Il simbolo qui sotto indicato, riportato sull'apparecchiatura elettronica da Lei acquistata e/o sulla sua confezione, indica che questa apparecchiatura elettronica non potrà essere smaltita come un rifiuto qualunque ma dovrà essere oggetto di raccolta separata.
1 Il distributore non sarà tenuto a ritirare l'apparecchiatura elettronica qualora vi sia un rischio di contaminazione del personale incaricati o qualora risulti evidente che l'apparecchiatura in questione non contiene i suoi componenti essenziali o contiene rifiuti diversi da apparecchiature elettriche e/o elettroniche. NB: le informazioni sopra riportate sono redatte in conformità alla Direttiva 2002/96/CE ed al D.
La marcatura CE con il simbolo di attention Mark ( ) poste sull’etichetta di prodotto potrebbero non rispettare le dimensioni minime stabilite dalla normativa a causa delle ridotte dimensioni di quest’ultima. Atlantis invita a visitare il sito web www.atlantis-land.com alla relativa pagina di prodotto per reperire manualistica e contenuti tecnici (aggiornamenti driver e/o funzionalità, utility, support note) aggiornati.
La ringraziamo per aver scelto un apparato della famiglia NetFly, la via più semplice per il Wireless networking. Questo documento è inteso come una guida rapida, pertanto per ulteriori dettagli sulla configurazione fare riferimento al manuale esteso contenuto nel CD. 1. PANORAMICA DI PRODOTTO Standard IEEE 802.
1.1 Requisiti di sistema Prima di procedere con l’installazione del prodotto verificare di disporre dei seguenti requisiti: Protocollo TCP/IP installato in ogni PC Un browser WEB quali Internet Explorer 5.0 o superiore, Netscape Navigator 6.0 o superiore 1.
LAN (1-4) Acceso blu in caso di collegamento a 100 Mbps. Lampeggiante in caso di trasmissione/ricezione dati. 1.4 Le porte posteriori PORTA R-SMA DC-IN WAN RJ45(LAN) RESET (Parte inferiore) SIGNIFICATO Avvitare delicatamente l’antenna (o le antenne nel modello NetFly AP4W300N+) fornita a corredo. Connettere l’alimentatore a questo jack. L’alimentatore ha i seguenti valori di targa: AC-DC (5V@1A). Connettere prima l’alimentatore alla rete elettrica e dopo qualche secondo al dispositivo.
lampeggiante ed il i Led LAN/WLAN saranno accesi (a seconda dei collegamenti fatti) o lampeggianti. In figura un esempio di installazione tipica in cui l’apparato viene utilizzato mostrando tutta la sua duttilità (come AP, in Multi SSID, come repeater ed in modalità WDS). 1.6 Settaggi di Default Prima di iniziare la configurazione dell’Atlantis Wireless Multi-Function Access Point è necessario conoscere quali siano i settaggi di default.
configurazione più dettagliata fare riferimento al manuale presente sul CD. Le configurazioni di Default dell’Atlantis Wireless Multi-Function Access Point sono: Username:admin Password: atlantis Indirizzo IP LAN: (192.168.1.252), Subnet Mask (255.255.255.0) DHCP Server: abilitato (192.168.1.50 - 192.168.1.
Cliccare 2 volte sull’icona Local Area Connection/Wireless e cliccare su Proprietà poi cliccare su Continua (per continuare è necessaria l’utorizzazione dell’utente). Selezionare Protocollo Internet Versione 4 Protocol (TCP/IPv4) e cliccare su Proprietà. Selezionare l’opzione Ottieni automaticamente un indirizzo IP e successivamente Ottieni indirizzi server DNS automaticamente. Premere su OK per terminare la configurazione.
Configurazione del PC in MAC OS Cliccare sull’icona Mela nell’angolo in alto a sinistra dello schermo e selezionare: Control Panel/TCP/IP. Apparirà la finestra relativa al TCP/IP come mostrata in figura. Scegliere Ethernet in Connect Via. Scegliere Using DHCP Server in Configure. Lasciare vuoto il campo DHCP Client ID. 2. Configurazione del NetFly AP4 2.1 Configurazione Tramite WEB Accedere col browser web al seguente 192.168.1.252. Premere il tasto invio.
2.2 Modalità Operativa L’access Point parte di default in modalità Bridge. Cliccare in NetFly AP4 Series->Operation Mode per cambiare la modalità operativa: Gateway: In questa modalità il NetFly diventa un vero e proprio router la cui WAN è la connessione Ethernet (configurata di default in client DHCP) il cui indirizzo IP è condiviso sulle 4 porte LAN e la WLAN (il NAT è attivo). L’indirizzo IP di default è 192.168.1.
DHCP attivo sull’interfaccia LAN (è possibile accedere dalla sola interfaccia ETH). In figura un riassunto delle varie modalità disponibili, Indirizzo IP utilizzato e le interfacce da cui è possibile avere accesso alla configurazione web del NetFly. Modalità Indirizzo IP Accesso DHCP Access Point (Bridge) 192.168.1.252 ETH (5 ports) Abilitato WLAN (192.168.1.50192.168.1.99) Gateway 192.168.1.252 ETH (4 ports) Abilitato WLAN (192.168.1.50192.168.1.99) Wireless ISP 192.168.1.252 ETH (5 ports) Abilitato (192.
3. Risoluzione dei problemi Questo capitolo illustra come identificare e risolvere eventuali problemi sul NetFly. A.1 Utilizzare i LED per la diagnosi dei problemi I LEDs sono un utile strumento per individuare eventuali problemi, osservandone lo stato è possibile individuare velocemente dove si verifica un eventuale malfunzionamento. A.1.1 LED Power Il LED PWR non si accende Steps Azione Correttiva 1 Accertarsi che l’alimentatore sia connesso al NetFly AP4 e alla rete elettrica.
1 2 3 4 Verificare che il LED relativo alla porta LAN posti sul pannello frontale del NetFly sia acceso. Se il LED è spento fare riferimento alla sezione A.1.2. Accertarsi di utilizzare un indirizzo IP corretto sul PC. Questo deve avere un indirizzo IP impostato manualmente (se come client DHCP non riesce ad ottenere l'IP) del tipo 192.168.1.5, Subnet 255.255.255.0. Collegare il PC direttamente al NetFly. Se è stato modificato l’indirizzo IP del NetFly è necessario modificare L’URL di accesso al prodotto.
3 di settaggi RTS Threshold e Fragmentation Threshold(bytes). Nella sezione Wireless->Advanced abbassare tali valori. Riprovare verificando se l’attribuzione dell’indirizzo IP avvenga correttamente. Alternativamente tale parametro andrebbe impostato anche sui driver del client wireless. Se il problema persistesse, procedere come da punto 4. Assegnare al client Wireless un indirizzo IP statico (del tipo 192.168.1.5, subnet=255.255.255.0) e provare ad effettuare un ping verso l’indirizzo IP del NetFly. 4.
Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP/VISTA are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis logo is a registered trademark of Atlantis.
CE in which Countries where the product may be used freely: Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland. France: except the channel 10 through 13, law prohibits the use of other channels. CE/EMC Restriction of Liability The product described in this handbook was designed, produced and approved according to the EMC-regulations and is certified to be within EMC limitations.
Norway (NO): This subsection does not apply for geographical area within a radius of 20 km from the center of Ny Alesund. Russia (CCP): only for indoor application. Declaration of Conformity Hereby We declare that this product is in compliance with the essential requirements and other relevant provisions of Directive “Electromagnetic Compatibility” and 1999/5/CE within CE Marking Requirememnt. CE Declaration is available on the web site www.atlantis-land.com.
human health objectives connected to a responsible treatment and recycling activities are achieved. PS.: The above mentioned information are reported herewith in compliance with Directive 2002/96/CE, which requires a separate collection system and specific treatment and disposal procedures for the waste of electric and electronic equipments (WEEE). For further and more detailed information, we invite you to visit our website at www.atlantis-land.
Thank You for choosing an Atlantis Product. For more detailed instructions on configuring and using the NetFly AP4, please refer to the online manual into CD. 1. Product Overview IEEE 802.11n Wireless Thanks to its embedded Access Point, based on the most recently 802.11n (up to 150/300Mbps) specifications, is possible to create high performance WLANs with extended coverage. NetFly is designed to operate in every working environment (domestic or SoHo).
1.1 System Requirements Before installing Router, your PC should meet the following: TCP/IP protocol must be installed on each PC Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later 1.2 Package contents Unpack the package and check all the items carefully. Also, keep the box and packing materials in case you need to ship the unit in the future.
WAN LAN (1-4) Lit when connected to Ethernet device (Blue for 10/100Mbps) Blinking when data transmit/received. Lit when connected to Ethernet device (Blue for 10/100Mbps) Blinking when data transmit/received. 1.4 Rear panel and ports PORT MEANING Connect the supplied power adapter to this jack. DC-IN RJ45(LAN) Reset R-SMA Connect an UTP Ethernet cable to one of the four LAN ports when connecting to a PC or an office/home network of 10Mbps or 100Mbps.
1.5 Cabling First you must connect the product to the RJ45 ports the PCs of your Lan or others Switch. In the end connect the DC Adapter to the socket then to the NetFly AP4. Once you’ve done all the connections the product will carry on immediately a autotest (120 seconds). With the power source on, once the device is connected, the Power, LAN and WLAN port LEDs will light up indicating a normal status.
This section describes the configuration required by LAN-attached PCs that communicate with the Wireless Multi-Function Access Point, either to configure the device or for network access.
Configuring PC (WindowsXP) Go to Start / Control Panel (in Classic View). In the Control Panel, doubleclick on Network Connections. Double-click Local Area Connection/Wireless. In the LAN Area Connection/Wireless Status window, click Properties. Select Internet Protocol (TCP/IP) and click Properties. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. Click OK to finish the configuration.
2. Configuring NetFly AP4 2.1 Browser configuration Open the web browser, enter the local port IP address of this NetFly, which default at 192.168.1.252, and click Go to get the login page. The default username is admin, password atlantis and click OK to continue.
2.2 Switching between Operating Modes Click on the System link on the navigation drop-down menu. You will then see five options: Operation Mode, Status, Schedule, Event Log, and Monitor. Click on Operation Mode. A dialog box will appear to notify you that the system will restart in order for the change to take effect. Click on the OK button to continue.
Operation Mode Access Point (Bridge) IP Address 192.168.1.252 Gateway 192.168.1.252 Wireless ISP 192.168.1.252 Accesso ETH (5 ports) WLAN ETH (4 ports) WLAN ETH (5 ports) DHCP DHCP Server Enable (192.168.1.50192.168.1.99) 3. Support For technical questions and support, please contact our help-desk by ticket on http://www.atlantis-land.com/ita/supporto.php. For generic informations, please send an e-mail to info@atlantis-land.com.
chimique, manuel ou de tout autre genre, sans avoir obtenu préalablement l’autorisation de notre entreprise. Non-responsabilité La présente entreprise n’admet ni requêtes ni de garantie, explicites ou implicites, au sujet du contenu et de manière spécifique exclue la possibilité de garantie, communicabilité ou adaptabilité pour des finalités particulières. Le logiciel décrit dans le présent manuel est vendu ou concédé en licence “tel quel”.
de l’Union Européenne et dans tous les pays appliquant la Directive 1999/5/CE, sans limitations, à l’exception des pays suivants : France : En cas d’utilisation de ce matériel en extérieur, la puissance de sortie est limitée dans les plages de fréquences ci-dessous. Pour de plus amples informations, consultez le site de l’ART : www.art-telecom.
Déclaration de Conformité Nous déclarons que cet appareil a été testé et est conforme à la Directive 99/5/CE du Parlement européen et du Conseil concernant les équipements hertziens et les équipements de terminaux de télécommunications et la reconnaissance mutuelle de leur conformité. Il est possible de télécharger sur le site web (www.atlantisland.com) le document complet.
Ce guide d’installation rapide vous permet d’installer et de configurer le NetFly AP4 en suivant des paramètres standards. Pour plus de précisions, tant sur les méthodes de configuration que sur le paramétrage avancé, reportez-vous au manuel sous format électronique (PDF) disponible sur le CD-Rom fourni. 1.
1.1 Besoin système Avant de commencer l’installation vérifiez si vous disposez des suivants requis: N’importe quel type de station de travail avec TCP/IP installé, peut être utilisé pour communiquer avec le routeur. Pour configurer d’autres types de station de travail, référez-vous au manuel du constructeur. Internet Explorer 5.0 ou Netscape Navigator 6.0 1.
wireless (une connexion active). WAN Clignotant blue pour indiquer la transmission des donnée. Allumé pour indiquer le correct fonctionnement de module wireless (une connexion active). LAN(1-4) Allumé quand le LAN (réseau) est connecté. Bleu= connexion à 10/100Mbps. Clignote lors des transferts de données. 1.4 Face arrière PORT USAGE R-SMA Connectez l’antenne de 4 dBi (ou les antennes) fournie à cette prise.
connectées) seront fixes où clignotant et la Led POWER allumée, ce qui signifie que le produit fonctionne correctement. Dans le schéma suivant il est possible de voir une installation en montrant les manières différentes d’utilisation du produit. 1.6 Configuration initiale Cette section décrit la configuration requise par les ordinateurs connectés au réseau sur lequel l’AP sera connecté.
Adresse IP (192.168.1.252), Subnet Mask (Masque de sous réseau) 255.255.255.0 DHCP (Fonction serveur DHCP) Activé (192.168.150-192.168.1.99) SSID= A02-AP4-WN+ ou A02-AP4-W300N+ Channel=Auto, WEP/WPA=WPA2-PSK (AES/CCMP) WPA Pre-Shared Key: NetFlyAP4 Mode: Bridge (Point d'Accès) 1.7 Configuration du TCP/IP Configuration sous Windows 2000 Allez au Panneau de Configuration. Double-cliquez sur Connexions Réseau et accès à distance. Double-cliquez sur connexion au réseau local.
Sélectionnez Internet Protocol 4 (TCP/IP) et cliquez sur Propriétés. Sélectionnez Obtenir une adresse IP automatiquement et après Obtenir les adresses des serveurs DNS automatiquement. Cliquez sur OK pour terminer la configuration. Configuration sous Windows 7 Allez sur Panneau de Configuration (Grandes/Petites icônes). DoubleCliquez sur Accès Réseau. Cliquer 2 fois sur Centre Réseau et Partage, puis cliquer sur Modifier les paramètres de la carte.
2. Configuration du NetFly AP4 2.1 Configuration avec le Browser Pour accéder à l’interface Web, lancez un navigateur Internet et tapez dans la barre adresse l’IP suivante 192.168.1.252: Un mot de passe vous est demandé, pour la première connexion. User = admin Password = atlantis et appuyez sur OK pour aller dans la configuration.
2.2 Modalité Operative Le produit peut être configuré pour fonctionner dans n'importe lequel des modes suivants : Accès sans fil, Pont point-à-point vers un autre point d'accès, Point-àmulti-point, Client sans fil, Répéteur sans fil et enfin Routeur. Routeur Mode (Operation Mode=Gateway): Routeur. Entre les 2 interfaces WAN(Ethernet) et LAN(les 4 ports F/E et l'interface sans fils) il y a le NAT. Adresse IP 192.168.1.252, pour la configuration: les 4 ports F/E et la WLAN. Serveur DHCP active.
Operation Mode IP Point d'Accès (Bridge) Routeur(Gateway) 192.168.1.252 Wireless ISP 192.168.1.252 192.168.1.252 Configurati on ETH (5 ports) WLAN ETH (4 ports) WLAN ETH (5 ports) DHCP Serveur DHCP active (192.168.1.50192.168.1.99) 3. Support Pour tous problèmes ou renseignements vous pouvez contacter le service d’assistence web d’Atlantis http://www.atlantis-land.com/ita/supporto.php. Pour avoir des info vous pouvez contacter info@atlantis-land.com ou prevendite@atlantis-land.com.
APPENDIX A: Technical Features Product Code Product Name Standards Chipset Memory Interface LED WPS/Reset Antenna Virtual AP Multiple SSID WDS Advanced Features Green Technical Specs A02-AP4-WN+ A02-AP4-W300N+ NetFly AP4 WN+ NetFly AP4 W300N+ IEEE 802.
Operation Mode Firewall & Security (Gateway/ISP Mode) QoS (Gateway/ISP Mode) Frequency Band Radio Technology Modulations Scheme Media Access Protocol Transmission Rate Wireless Security Transmitting Power Receiver Sensitivity Number of Operational length for maximum performance with minimum power use).
Channel Range Coverage Management Certifications Dimensions (mm)/ Weight Temperature Range Humidity System Requirements Package Contents Indoor: up to 120 meters Outdoor: up to 350 meters Configuration: Web-based configuration (HTTP)/Telnet Firmware Upgrade: Upgrade firmware via webbrowser (Keep latest setting when f/w update) System monitoring: Status, Statistics and Event Log SysLog Client Bandwidth Measurement (QoS) IP range and bandwidth management Backup & Restore: Settings through Web C
Atlantis SpA Via S. Antonio, 8/10 20020 Lainate (MI) info@atlantis-land.